LaserLine MasterCross-Laser XPG Manual De Instrucciones página 17

2
Power supply
To insert the lithium-ion
rechargeable battery
Open the battery compartment
and insert the lithium-ion battery
as illustrated.
!
When transporting, always switch off all lasers, secure pendulum
and push the slide switch (2) to the right.
3
Horizontal and vertical levelling
Release the transport restraint, push the slide switch (2) to the left.
The laser cross will appear. The laser lines can be switched individually
with the selection button.
LASER
The transport restraint must be released for horizontal and vertical
!
levelling. The laser lines flash as soon as the device is outside the
automatic levelling range of 3.5°. Position the device such that it is
within the levelling range. The laser lines stop flashing (steady light).
LASER LASER
MasterCross-Laser XPG
LASER LASER LASER
17
EN