Usb Power Port - Wagan Tech 2509 Manual De Usuario

DC POWER PORT
The DC Power Port (accessory socket) is located to the right front side of the unit. The port can
power a DC load of up to 11 Amps. Overloading the port may result in "tripping" a self-resetting
circuit breaker. Removing the overload automatically restores power to the DC Power Port.
1. Uncover the dust cover from the Power Port.
2. Insert the 12V DC accessory plug into the Power Port.
3. Set On/Off safety switch to the "ON" position.
4. Operate the appliance as usual.
5. After use, turn OFF the safety switch.
6. Disconnect the accessory plug from the DC Power Port and store the accessory.
7. Replace the Power Port's dust cover.
8. Recharge the Jumper as soon as convenient.

USB POWER PORT

Two USB power ports located underneath the LED work light can power/charge devices that
require 5V, up to 2.1 Amps through the use of a user supplied cable.
1. To use the USB ports, connect the USB device to one of the USB ports and press down the
USB ON/OFF switch once to power ON the USB port. The USB power indicator LED will
light up.
2. When finished, disconnect the device from the USB port on the jumper and press down the
USB ON/OFF switch once to power OFF the USB port. The USB power indicator LED will
turn off.
3. Recharge the jumper as soon as convenient.
STORAGE
This unit may be stored in any position. Make sure the clamps and air hose are securely tucked
away in their original positions. Store in a cool, dry area. If the unit is not used for a prolonged
period of time, recharge every 2 months in the winter and every month in the summer.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2014 Wagan Corporation. All Rights Reserved.
8