Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
• Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such
as sunshine, fire or the like.
• The AC mains adaptor is used as the
disconnect device, the disconnect device
shall remain readily operable.
PARTS DESCRIPTION
Parent unit
1. Charge indicator LED
2. Power / Pair indicator LED
3. Outdoor volume indicator LED
4. Screen
5. Intercom button
6. Menu / zoom button
7. Up / volume + button
8. Right / brightness + button
9. Down / Volume - button
10. Left / brightness - button
11. OK button
12. Speaker
13. Power on/off button
14. Power input
15. Support frame
Baby unit
1. Microphone
4
2. Infrared LED
3. Camera
4. Power / pair indicator LED
5. Speaker
6. Antenna
7. Temperature probe
8. Pair button
9. Power input
10. Base
GETTING STARTED
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Place the appliance on a stable surface and make sure there is
10 cm. free of space around the appliance.
•
Connect both the parent unit and the baby unit to the provided
power adaptors. On the baby unit a blue LED will light up.
•
Press the power button of the parent unit to switch it on. Press it
again to switch it off.
•
NOTE: Charging the parent unit fully before use is recommended.
This will allow the unit to operate on battery in the event of a
power failure.
USE
Pairing the units
1. Press and hold the pair button on the baby unit until the pair
indicator LED flashes.
Publicidad
