How to Operate
1. Make sure the unit is plugged into a properly
earthed electrical socket of the same voltage as
specified on the unit.
2. Put the food into a container, place it in the center of
the oven and then close the door securely.
3. In normal use, turn the Selection switch to the
middie "'-@g-" position and in case of defrosting,
turn the Selection switch left to the 'tex?' position.
The Selection switch of the unit has 3 positions
(faa ge Oo)
4. Set the Timer for the proper cooking time, the Oven
Lamp will illuminate and unit will be ready to
operate. When setting the Timer for less than 2
minutes, turn the Timer past the 2-minute point and
then return to the correct time.
5. Press the Cook button. The Cooking lamp will
illuminate and the cooling fan will start.
6. You may open the door while the oven is operating
to check the cooking conditions. As soon as you pull
the door handle to open the door, the safety
mechanisms will operate to stop the microwave
emission. The Timer will stop automatically when
the door is opened. If you wish to continue cooking,
close the door and press the Cook button. If
cooking, adjust the Timer to the desired setting.
7. When the time is up, the bell will ring and the
microwave emission will stop. The Cooking lamp
and the cooling fan will go off. Make sure the timer
dial is turned back to the '0' position.
8. Open the oven door and take out the food.
A. You only have to add oven middle glass tray in case
of double shelves cooking. Then you can follow
exactly the same procedure as on above to operate
it.
B. As the matter of fact, we recommend you to use
lower position when double shelves cooking is not
necessary.