HIKOKI CS 1825DC Instrucciones De Manejo página 12

English
Power Output
2 to 3 digit number
NAMES OF PARTS (Fig. 1–Fig. 44)
Battery
(sold separately)
Latch
Ventilation holes
Terminals
Battery cover
Insert
Pull out
Lock-off lever
Switch
Pilot lamp
Combi box spanner
Side cover
Nut
Tensioning screw
Increase the tension
Decrease the tension
Saw chain
Guide bar
Sprocket
Blade direction
Illustration showing
blade direction
Bolt
Chain tensioner boss
Lug
Guide bar tip
Drive link
Chain oil
Oil sight glass
Oil pump adjuster
Chain brake
Actuation
Release
Battery level indicator
switch
Battery level indicator
lamp
Spike
(sold separetly)
Rear handle
(Top handle)
Front handle
Round fi le
1/5 of diameter of fi le
Depth gauge jointer
Flat fi le
Protruding depth
gauge head
Round off
Chain oil spout
Groove
Oil hole
Chain catcher
Battery sliding
grooves
Terminal
(Product)
Air blow gun
Terminal (Battery)
Sliding grooves
Hook
12
SPECIFICATIONS
1. Power tool
Model
Voltage
Saw chain
Guide bar
Sprocket
No-load chain speed
Chain oil tank
capacity
Battery available for
this tool
Weight*
* Weight: Saw chain, guide bar, chain case, oil, battery
not included
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery (sold separetly)
Model
Voltage
Battery capacity
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains
the accessories listed on page 322.
Standard accessories are subject to change without
notice.
APPLICATIONS
○ Cutting of timber/logs
○ Pruning of garden trees
CHARGING
Battery and battery charger are not included with this
product.
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the
receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 6.
CS1825DC
18 V
Type: 90PX-040X
Pitch: 9.5 mm (3/8")
Gauge: 1.1 mm (0.043")
Type: 104MLEA041
Size: 250 mm
(Max. cutting legth)
Number of teeth: 6
Pitch 9.5 mm (3/8")
12.1 m/s (730 m/min)
70 ml
BSL1820M, BSL1830C,
BSL1840M, BSL1850,
BSL1850C, BSL1850MA,
BSL36A18, BSL36B18
2.0 kg
BSL1820M
18 V
2.0 A