BTV VISION Serie Manual De Uso página 3

1. FIRST USE
To open the safe for the first time, remove the
security key cover located between the knob and the
keypad on the front panel.
Insert the emergency key and turn counterclockwise.
At the same time, turn the knob clockwise to open
the safe.
2. INSTALLING THE BATTERIES
The Vision safe uses 4 AA (1.5V) batteries.
Open the safe and remove the battery compartment
cover.
Put the batteries inside the compartment correctly.
Make sure that the batteries are inserted correctly
with respect to their polarity.
Please use only alkaline batteries.
3. PROGRAMMING AND CHANGING THE USER CODE
With the door open, press the RESET button, located
on the top of the door cover.
The LCD will display "--------", then enter the new
user code (1-8 digits) and press "#" to confirm (if the
code is 8 digits, it will be confirmed automatically).
If the display shows "IN" and beeps, the code has
been successfully recorded.
To modify the user code, follow the steps described
above.
Before closing the door, check the new code by
following the opening instructions.
4. PROGRAMMING AND CHANGING THE MASTER CODE
FACTORY MASTER CODE: 107321
Press the "#" button to start. The display will show
"-----------".
Enter "00" and press the RESET button located on
the top of the door cover. The display will show
"---------" again.
Enter the new master code (1-8 digits), and press
"#" to confirm. (If the master code has 8 digits, it will
be confirmed automatically.)
If the display shows "IN" and beeps, the code has
been successfully recorded.
To change the master code, follow the instructions
described above.
Before closing the door, check the new code,
following the opening instructions.
5. OPENING THE SAFE
Press "#" to start. Then enter your code and press
"#" again to confirm (if the code has 8 digits, it will be
confirmed automatically).
If the entered code is correct, the display will show
"OPEN". Turn the key to open the door.
If the entered code is wrong, the display will show
"ERROR". When "-------" is displayed again, enter your
code correctly.
Press "*" to delete a wrongly entered number.
Press "*" before entering the code to make the
characters not appear on the screen.
NOTE: When 10 consecutive incorrect codes are
entered, the safe will lock for 20 seconds.
6. LOCKING THE SAFE
To close the safe, close the door and turn the key
counterclockwise. The safe will be closed.
7. EMERGENCY OPENING
For your safety, the Vision safe has an emergency
key. Two units are supplied with the safe.
ENGLISH
These keys allow you to open the safe, even when
the batteries are low, or when the code has been
forgotten. The opening process is the same as
described in point 1 (First use).
8. CHECK THE OPENING RECORDS
With the case open (display shows "OPEN"), press
"0" or "8" button to check the opening records.
The record of each opening is displayed on two
screens. The first screen shows the type of code
(user code or master code) and the registration
number.
The second screen shows the date and time of the
opening record.
Press "0" to scroll backward and "8" to scroll
forward in the record.
If you press the RESET button (located on the top
of the door cover) once. The opening record will be
cleared, and the display will show "CLEAR".
The safe can keep the record of up to 58 openings.
If you do not press any button for 10 seconds, the
system will return to the main screen.
9. CHANGE OF DATE AND TIME
Press the "*" button, you can start to modify the
system date and time.
For example, to set 02/09/2018, 10:45 am, press 18 02
09 10 45, corresponding to year-month-day and hour-
minutes.
10. RESTORE THE ORIGINAL CODES
First of all, remove the batteries from the safe.
Then press the RESET button located on the top of
the door cover and hold it down. Install the batteries
at the same time, until the display shows "CLEAR" AND
"GOOD".
The codes will have been restored to the original
ones:
USER CODE: 1234 | MASTER CODE: 81726354
11. CHANGING THE BATTERIES
When the display shows "LO-BATT", it means the
batteries are low and you should change them.
To make sure the batteries are installed correctly,
check the safe before closing the door.
NOTE: Do not use rechargeable batteries or any other
type of non-alkaline batteries.
12. FIXING THE SAFE
To reduce the risk of theft, the safe can be
anchored to the floor, wall or cabinet.
It has holes in the base and in the back, which can
be used with the supplied screws.
WARNING:
Please keep your emergency keys in a safe place,
never inside the safe.
In the case of loss of keys, forgotten code and
discharged batteries, the provider is not responsible.
3