TERMA VEO SMART WI-FI Manual página 14

for approx. 15 seconds (the entire display flashes every 5 seconds,
after the third flash, release the buttons.
All LED strips will flash 3 times and the + / − but-
tons will start flashing steadily, the device will go
into PAIRING MODE for 5 minutes.).
NOTE: from now on, the device broadcasts its network address (sig-
nal) and is seen by the SMART application.
c. Launch the SMART application and go to the Devices screen.
d. Select the + button and follow the
instructions in the application (first
scan the code from the sticker on
the device (Fig.3) or enter it manu-
ally, select the local Wi-Fi network
and enter the router password, then
from the list of available devices,
select the device currently being
added).
e. When the automatic part of the process is over, select the appropri-
ate zone in the application (or create a new one) and enter the de-
vice name and other data.
14