Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE INSTALLATION OR FIRST USE:
APPLIES TO CLASS I AND CLASS II DEVICES
1. Read the chapter: Safety requirements — Installation.
2. Fit the heating element using the correct spanner (size 24).
3. The heating element must be installed at the bottom of the radiator, per-
pendicular to the radiator pipes, while preserving space for the proper
circulation of the heating medium.
4. Use a suitable heating medium for
filling the electric radiator, i.e. (water,
special products based on water and
glycol for use in central heating sys-
tems, or oil which complies with the
requirements of the manufacturer of
the radiator and heating element).
5. Make sure an adequate air cushion is present to protect against exces-
sive pressure build up within the electric only radiator (or leave one of
the radiator valves open in central heating system).
8% (20°C)
9
EN
6. Follow the subsequent guidelines when connecting the electrical
installation:
a. Brown wire — live connection to the circuit (L)
b. Blue wire — connect to neutral (N)
c. Yellow & green wire — (tylko w urządzeniach klasy I) — earth connec-
tion (PE)
7. Do not switch the heating element on if it is not fully immersed in ra-
diator heating medium (applies also to the first use)!
8. Before filling the radiator with heating medium, ensure that the heat-
ing element is fitted properly and that it is water tight.
9. In central heating installation radiator must be fitted with the valves en-
abling disconnection of the radiator from the rest of the system.
10. For detailed installation hints — see the last pages of this manual.
Publicidad
