Descargar Imprimir esta página

Craftsman 917.372871 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

A
Read these instructions and this manual in its entirety
before you attempt to assemble or operate your new lawn
mower'.. Your new lawn mower has been assembled at the
factory with the exception of those parts left unassembled
for shipping purposes, To ensure safe and proper opera-
tion of your lawn mower, all parts and hardware you
assemble must be tightened securely.. Use the correct
tools as necessary to ensure proper tightness, All parts
such as nuts, washers, bolts, etc.,, necessary to complete
the assembly have been placed in the parts bag,.
TO REMOVE LAWN MOWER FROM
CARTON
Remove loose parts included with mower_
o
Cut down two end corners of carton and lay end
panel down flat,,
o
Remove all packing materials except padding be-
tween upper and lower handle and padding holding
operator presence control bar to upper handler
°
Roll lawn mower out of carton and check carton
thoroughly for additional loose parts_
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE (See Figs. 1 & 2)
IMPORTANT:
UNFOLD HANDLE CAREFULLY SO AS
NOT TO PINCH OR DAMAGE CONTROL CABLES..
=
Raise lower handle section to operating position and
align hole in handle with one of three height positioning
holes,
°
Insert handle bolt through handle and bracket and
secure with knob.,
o
Repeat for opposite side of handle°
°
Raise upper handle section to operating position, re-
move protective padding and tighten handle knobs
securely,
Remove any packing material from around control bar.,
°
Your handles may be adjusted for your mowing com-
fort. Refer to Service and Adjustments section of this
manual.
OPERATOR PRESENCE
CONTROL BAR
UPPER HANDLE
LIFT UP
LOWER HANDLE
FIG. 1
HANDLE
ADJUSTMENT
BRACKET
MOWING POSITION
FIG. 2
6

Publicidad

loading