Cooper Lighting Solutions WaveLinx Pro WAC2-POE Instrucciones De Instalación página 3

Wireless Area Controller (WAC2-POE) with Outdoor Rated Enclosure
Enterprise installation
BACnet/IP
Public (REST) API
Third Party system
(hardware provided
by others)
Building LAN
Touchscreen
WaveLinx Pro
Wireless Area
Controller
Area or Room
(49 + 1 construction area)
120-347V 20A
Dimming Switchpacks
WaveLinx Pro wireless controlled devices
(up to 200 devices per WAC2 - 150 devices best practice) - see Note
Overview
The Wireless Area Controller (WAC) in an Outdoor Enclosure is the main component of the WaveLinx Pro wireless connected lighting
(WCL) system. WaveLinx Pro eliminates the cost and complexity of typical wireless control system commissioning while providing
a flexible and reconfigurable topology for on the fly space adjustments. The WaveLinx system meets modern code and utility
requirements, delivers energy and cost savings, while enabling buildings to become smart buildings.
The WAC coordinates between the WaveLinx Pro Mobile App and various WaveLinx Pro devices to create communications and a
building ecosystem that provides out of the box functionality and leverages our patent pending automatic code commissioning
features. Using standards-based wireless mesh compliant topology the WAC communicates to various WCL standards-based devices
to provide area, lighting zone configuration, monitoring, and control.
The WAC provides centralized coordination of multiple areas for partial ON/partial OFF scheduling, demand response (Trellix
application required), lighting, occupancy and daylight settings and scene control. A single WAC can be connected to the building
LAN to coordinate up to 49 user-defined areas and 1 construction area, or multiple WAC's can exist on a building LAN to scale the
system to hundreds of areas all accessible for setup, configuration and control through the WaveLinx Pro Mobile App.
WaveLinx Pro wireless connected system components
• Wireless Area Controller (gateway)
• WaveLinx Pro Mobile App (commissioning and user personal control)
• WaveLinx Pro Wallstation - wired or battery (manual lighting and scene control)
• WaveLinx Pro Touchscreen
• Wireless INstinct Sensor (fixture integrated occupancy sensor, ambient light sensor and control)
• WaveLinx Pro Relay Switchpacks with 0-10V
• WaveLinx Pro Receptacles (wall mounted power outlet)
• WaveLinx Pro Room Based Sensor (ceiling mounted PIR occupancy sensor)
www.cooperlighting.com
Desktop/Laptop
with web browser
(hardware provided
by user)
BACnet Router
1
(hardware provided
by others)
PoE
Power
Room Based Controlled
Receptacle Wallstation
Occupancy Sensor
Trellix Core
WaveLinx Pro Mobile App used for
system setup and personal control
WaveLinx Pro
Wireless Area
Controller inside
Outdoor Enclosure
Scene Integrated
Ambient
WaveLinx Pro
Area or Room
(49 + 1 construction area)
Area or Room
(49 + 1 construction area)
KEY
Wi-Fi Signal
IEEE 802.15.4
Note:
Integrated
Trellix Core Pro shown in this illustration.
Outdoor
Trellix Core hardware can be either Pro,
Enterprise or Virtual.
1
BACnet Router only required if
Trellix Core and third party BACnet client
are on differenet subnets.
IB50301921 page 3
June 2022