BSL CBSL-51 Manual De Instrucciones página 11

Pairing method
1. Open the top cover of the charging case. The headphones will turn on automatically. If
not, please press the left and right multi-function areas of the headset for 3 seconds at
the same time to turn on the headset until the red and blue lights flash alternately, and
enter the headset pairing state. After successful pairing, the main earphone will continue
to flash red and blue light alternately and the
secondary earphone without light, while both play the successful pairing sound.
2. Start the bluetooth function of mobile phone or other devices. If it is an Android phone
or device, please click the "search for bluetooth device" option. When the wireless
headset model (CBSL-51 by default) is found, click to enter pairing; After the pairing is
successful, the main (right) earphone will send a signal that the connection is successful,
and the indicator lights of the left and right earphones turn blue and enter the connection
waiting state. After the pairing is successful, the main earphone
will be the right channel and the secondary ear will be the left channel.
Burden
1.Plug one end of the TYPE-C charging cable into the charging case (5v200ma), and plug
the charger into the other end to charge the charging case. The red light will flash and
the long red light will turn on. When this happens, the battery will be fully charged.
2.Headphone charging: Put the headphones in the charging bin and close the lid to
charge
automatically. When charging, the indicator light on the earphones it is red and turns off
after charging. When charging the earphones, the light on the charging bin is blue, and
when the earphones are fully charged, the lights turn off.