Scheppach Compact 15t Traduccion Del Manual De Instrucciones Originale página 37

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 19)
1. Transport handle
2. Splitting column
3. Riving knife
4. Control arm right
5. Operating lever right
6. Retaining claw
6a. Hole
7. Trunk lifter
7b. Trunk lift holder
8. Swivel table
9. Locking hooks
10. Trunk lifting support
10a. Hexagon socket screw M6x10mm
11. Base plate
12. Support
13. Transport wheels
14. Hydraulic oil tank
15. Ventilation screw
16. Hoop guard
16a. Holder
17. Engine
18. Operating lever left
19. Control arm left
20. Rocker switch
21. Stop lever
22. Chain hook
23. Support points
24. On/off switch
25. Support wheel
26. Trunk lift lock
27. Lever
28. Chain
29. Stop screw
30. Wheel holder right
31. Wheel holder left
32. Oil dipstick
33. Oil drain screw
34. Electrical power connection
35. Cap nut (stroke setting bar)
36. Locking screw (stroke setting bar)
37. Magnetic stop
www.scheppach.com GB | 37