Publicidad
Idiomas disponibles
Idiomas disponibles
i
,,,i Ill I
I
S|epelllllllll1,111 She
_!t
Keys
(2) Keys
Your new tractor has been assembled at the factory with exception of those parts left
unassembled for shipping purposes.
TOOLS
REQUIRED
FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes are listed.
(i) 1/2" wrench
Tire pressure gauge
(2) 7/16" wrenches
Utility knife
Pliers
When right or left hand is mentioned in this
manual, it meanswhen you areintheoperating
position (seated behind the steering wheel).
TO REMOVE
TRACTOR
FROM
CARTON
UNPACK CARTON
•
Remove all accessible loose parts and
parts cartons from carton.
-
Cut along dotted lines on all four panels
of carton. Remove end panels and lay
side panels flat.
•
Check for any additional loose parts or
cartons and remove.
BEFORE
REMOVING
TRACTOR
FROM SKID
TO ADJUST SEAT
-
Sit in seat.
•
Liftupadjustmentlever(A)
andslideseat
until a comfortable position is reached
which allows you to press clutch/brake
pedal all the way down.
•
Release lever to lock seat in position.
TO CHECK BATTERY
I. Lift seat to raised position.
NOTE: If this battery is put into service after
month and year indicated on Jabel (Iabel is
located between terminals) charge battery
for minimum of one hour at 6-10 amps. (See
"BATTERY" in Maintenance section of this
manual for charging instructions).
•
For battery and battery cable installation
see "REPLACING
BATTERY" in the
"Service and Adjustments" section inthis
manual.
7
NOTE: You may now roll your tractor off
the skid. Follow the instructions below to
remove the tractor from the skid.
WARNING: Before starting, read, un-
derstand and follow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area. Be sure
the area in front of tractor is clear of other
people and objects.
Publicidad
