Publicidad
Idiomas disponibles
Idiomas disponibles
TO ROLL TRACTOR
OFF SKID (See
Operation
section
for location
and
function
of controls)
1. Raise attachment lift lever to its highest
position,
2, Release parking brake by depressing
clutch/brake pedal.
3, Place freewheel control in "transmission
disengaged position"(See "TO TRANS-
PORT" in the Operation section of this
manual).
4. Roll tractor forward off skid,
5. Remove banding holding the deflector
shield up against tractor,
Continue with the instructions that follow.
CHECK TIRE PRESSURE
The tires on your tractor were overinflated at
the factory for shipping purposes. Correct
tire pressure is important for best cutting
performance.
• Reduce tire pressure to PSI shown on
tires.
CHECK
DECK
LEVELNESS
For best
cutting
resuRs,
mower
housing
should be properly
leveled.
See"TO LEVEL
MOWER"
in the Service
and Adjustments
section
of this manual.
CHECK
FOR PROPER POSITION
OF
ALL BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
Service and Adjustments s ectionofthis man-
ual, Verify that the belts are routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating
properly. See "TO CHECK BRAKE" in the
Service
and Adjustments section of this
manual,
CHECKLIST
Before
you operate
your new
tractor, we
wish to assure
that you receive
the best
performance
and satisfaction
from
this
Quality Product.
Please review the following
checklist:
V r All assembly
instructions
have
been
completed.
J" No remaining
loose parts in carton,
ti" Batter,] is properly prepared and charged.
•/" Seat is adjusted
comfortably
and tight-
ened securely.
t/All
tires are properly
inflated.
(For ship-
ping purposes, thetires were overinflated
at the factory).
t/Be
sure mower deck is properly leveled
side-to-side/front-to-rear
for best cutting
results.
(Tires must be properly
inflated
for leveling).
Vt Check mower and drive belts.
Be sure
they are routed properly
around pulleys
and inside all belt keepers,
v ( Check wiring.
See that all connections
are still secure
and wires are properly
clamped.
v ( Before driving tractor, be sure freewheel
control
is in "transmission
engaged"
position (see "TO TRANSPORT"
in the
Operation
section of this manual).
While learning howto use yourtractor,
payex-
tra attention to the following important items:
Vf Engine oil is at proper level.
J
Fueltankisfitledwithfresh,
clean, regular
unleaded
gasoline.
J" Become
familiar
with all controls,
their
location
and function.
Operate
them
before you start the engine,
t/' Besure brake system is in safe operating
condition.
t/" Be sure Operator
Presence System and
Reverse
Operation
System
(ROS) are
working properly (Seethe
Operation and
Maintenance
sections
in this manual).
t/It
is important
to purge the transmission
before
operating
your
tractor
for the
first time.
Follow
proper
starting
and
transmission
purging
instructions
(See
"TO
START
ENGINE"
and "PURGE
TRANSMISSION"
in the Operation sec-
tion of this manual).
Publicidad
