Publicidad
Idiomas disponibles
Idiomas disponibles
ignition
Speed Shifter Lever
Remole Chute Control Lever
\
Auger Drive
Electric Startel Button
Headl
Drive Lever
Chute Deflector
e
Chute
Control
_ttteControl
Recoil Starter
Auger Housing
Height Adjust
Bolt
Auger Drive Lever - Starts and stops the
auger and impeller (snow gathering and
throwing),
Traction Drive Lever - Propels the snow
thrower forward and in reverse,
Headlight - Turns on whe_neverengine is
running.
Speed Shifter Lever - Selects the speed of
snow thrower (6 speeds forward and 2
speeds reverse).
Crank Assembly-
Changes the direction ol
snow throwing through the discharge chute.
Chute Deflector - Changes the distance
the snow is thrown,
Discharge Chute - Changes the direction
the snow is thrown.
Choke Control - Used to start a cold en-
gine.
Height Adjust Skids - Adjusts the ground
clearance of the auger housing.
Ignition
Key - Must be inserted
to start the
engine.
Primer Button - Injects fuel directly
into the
carburetor
manifold
for fast starts in cold
weather.
Recoil Starter
Handle
- Starts the engine
manually.
Throttle
Control
- Controls
the engine
speed.
Electric
Starter Button - Used to start the
engine using the 120 V, electric starter.
Remote
Chute Control
Lever- Push for-
ward to discharge
snow high and far. Pull
remote lever back to discharge
snow down°
Shear Bolls - Are special bolts that are de-
signed to break (to protect
the
machine)
if an object becomes
lodged in
the auger housing.
Use of a harder bolt will
destroy
the protection
provided
by the shear
bolt.
CAUTION:
Read owner's manual before operating
machine,
Never direct discharge
toward bystanders,
Release the auger control bar and stop the engine betore unclog-
ging discharge
chute or auger housing and before leaving the machine.
10
Publicidad
