GE 21 Serie Manual Del Propietario Y Instalación página 25

Installation Instructions
REMOVING THE FREEZER DRAWER Ion
some models)
The freezer drawer can be removed, if needed, to fit
through tight areas.
Read these instructions completelg and carefullg.
m REMOVE THE BASKET
[] Open the freezer drawer until it stops.
r_ cut the 2 wire ties off of the basket with wire
cutters.
[] The freezer basket rests inside 4 tabs on the
freezer slides. Lift the basket up and out of the
4 tabs.
FD] Tilt the front up and lift the entire basket up
and out of the drawer.
\.
\
\
\,
\.
\
[_] REMOVE THE BASE GRILLE
(if needed}
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not fit
through a doorwag, the base grille can be
removed.
rA] Remove the base grille bg removing the
2 Phillips-head screws.
[] REMOVE THE DRAWER FRONT FROM
THE SLIDES
[_ Remove the 10 hex-head screws from the door
and remove the door.
DO NOT remove the torx screws from the
rail assemblies.
l
DONOTremove
torx screws
RailAssembly
r_ set the drawer front non-scratching
on O
surface.
r_ Push the rail assemblies back into the cabinet.
25