Publicidad
Idiomas disponibles
Idiomas disponibles
Firmware version and charger model.
Eg Firmware version 1.00 and model Q1
Current charger programming: Voltage, current,
charge curve (battery type) and end of charge
mode (Floating or Equalize).
Eg.:
Voltage: 24V
Current: 15A
Battery type: WETD (Wet Deep)
End of charge: Equalize
Afterwards the charger is ready to start charging
when the battery is connected.
The display shows a flashing drawing of a battery
to indicate that the charger is waiting for the battery
to be connected. In this state the charger is not
active and does not deliver tension.
Charging begins automatically when the battery is connected
to the switched-on charger and no user intervention is required.
While charging, the display shows the estimated
battery charge percentage.
19.
Publicidad
