cecotec CLEANFRY ADVANCE 1500 Manual De Instrucciones página 29

1. PARTS AND COMPONENTS
Fig. 1
1.
Basket
2. Basket handle
3. Oil filter
4. View window
5. Pot
6. Indicator light
7. Temperature knob
8.
Removable lid
2. BEFORE USE
Take the product out of the box and remove all packaging materials.
Make sure all parts and components are included and in good conditions. If any of the parts
show visible signs of damage, contact immediately the official Technical Support Service of
Cecotec.
Clean the appliance thoroughly before using for the first time:
Take the removable lid out by pulling the lower part towards you.
Remove the basket.
Wipe the inside of the lid, basket and oil inner pot with a damp cloth and dry thoroughly.
Make sure the appliance is switched off before connecting it to a wall outlet.
Pour a maximum of 1.5 litres of oil or liquid fat into the fryer ensuring it is between the maximum
and minimum levels marked on the inside of pot.
3. OPERATION
Connect the device to the power supply.
Set the temperature knob at the desired temperature. The light indicator will light up on red.
Wait until the oil reaches the right temperature and the light indicator turns off. This process
will take about 10 minutes.
Lower the basket slowly into the oil.
Lift the handle to the upright position.
Fig. 2.
When food is cooked, turn the temperature knob all the way to the left, open the lid carefully
and lift the basket using the basket handle until it clicks into position to place the basket in the
drain position.
CLEANFRY ADVANCE 1500/1500 BLACK
ENGLISH
29