10
3 IN 1 GRILL
BEFORE FIRST USE
1. Open lid and remove the pre-installed plates by pressing the Upper and
Lower Plate Release Buttons .
2. Wash plates in warm soapy water, rinse, and dry thoroughly before first
use.
3. Do NOT immerse base in water or any other liquid.
4. To help maintain the non-stick coating, before using the cooking plates for
the first time, lightly coat with vegetable oil on a paper towel or lightly spray
with a cooking spray. You may do this periodically throughout the use of this
product.
HOW TO USE
1. Select a matching pair of plates to use depending on what you plan to
cook.
2. Insert the selected plates securely into the top and bottom of the unit.
3. Each set of plates has 2 tabs on the rear edge of the plate. The tabs fit into
the rear of the base unit.
4. Each set of plates has a tab in the center of the front edge of the plate.
This will snap into the center locking tab on the top and bottom of this unit.
Press plates firmly into place to secure the plate into the proper position.
5. Close the lid and plug the power supply cord into a standard 110V outlet.
The indicator light will come on.
6. Always preheat the unit with the lid closed. The Red Ready Indicator Light
will turn off when the unit is preheated, approx. 3-5 minutes. PLEASE NOTE:
the Red Ready Indicator Light will cycle on and off throughout the cooking
time to let you know that the unit has reached its maximum temperature. It
does NOT indicate when the cooking time is complete.