Beaba N6T Manual página 18

Recommendations for warming time in minutes (only for Baby Jar mode) :
Initial
Container type
temperature
Frozen
Glass
Fridge
Room
Frozen
Plastic
Fridge
Room
Note :
Please take the recommendation above as the referenced need warming time
and check if the baby jar is ready at that moment.
Heating time varies with different brands of containers and materials. The volume
of baby food to be heated has also a significant impact. If the baby food is not hot
enough, put it back in the appliance and restart the baby jar mode to heat again
for few minutes.
WATER BATH MODE
The Water Bath mode can warm gradually the breast milk until it arrives at the
desired temperature (22°C to 42°C). The gentle heating is ideal for breast milk as
it allows to keep the nutrients.
1. Pour water into the bottle warmer (level max)
2. Place the bottle and lift-out basket into the bottle warmer.
3. Press the ON/OFF button.
4. Press the Water Bath mode button.
5. When the temperature indicator flashes, press the setting button +/- to choose
the temperature as you wish (22°C-42°C). The default temperature is 37°C.
6. If you want to customize warming time, press again the Water Bath mode
button. When the time indicator flashes, press the setting button +/- to choose
the working time (1-59 mins, 1-3 hours). The default time 30min.
7. The bottle warmer will start working after the temp/time indicator flashes
Volume of baby food
130g
Please put the frozen baby jar in refrigerator for 12 hours to
defrost it and then use baby jar mode to reheat it to 37°C
7 min
4 min
Please put the frozen baby jar in refrigerator for 12 hours to
defrost it and then use baby jar mode to reheat it to 37°C
7 min
5 min
18
200g
11 min
6 min
10 min
7 min