Makita DVC261 Manual De Instrucciones página 12

NOTE: Always use a suitable front cuff. When using
the front cuff 24, attach it to the front cuff 22 that is
connected to the hose.
1
Fig.22
► 1. Front cuff 22 2. Front cuff 24
When using ø28 mm dust extraction
hose
1.
Attach the front cuff to the hose for dust extraction.
When connecting the front cuff, make sure that it is
securely screwed on the hose.
2. Connect the front cuff to the tool's extraction
outlet.
3
Fig.23
► 1. Front cuff 2. Extraction outlet 3. Hose
The front cuff can be detached by turning it counter-
clockwise while holding the hose.
When using ø38 mm hose with front
cuff 38
1. Twist and insert the joint or the front cuff to the
inlet part on the hose, depending on the tool that you
are going to connect.
2. Connect the front cuff to the tool's extraction
outlet.
2
1
Fig.24
► 1. Joint 2. Front cuff 3. Extraction outlet 4. Hose
2
To remove the joint and the front cuff, follow the installa-
tion procedures in reverse.
1
12 ENGLISH
4
3
1
2