cecotec CONGA ROCKSTAR 3500 STORM ERGO TWICE ANIMAL Manual De Instrucciones página 48

ENGLISH
- Dualbrush vacuum head
- Wall bracket
- Jalisco brush
- 2-in-1 accessory for furniture
- Accessory for corners
- Flexible hose
- Accessory for pets
- Instruction manual
3. PRODUCT ASSEMBLY
Battery assembly
Fig. 2
- Insert the battery in the corresponding slot on the main body. Once inserted, it will click
into place. Make sure it's secured in position.
- To remove the battery, press the release button and remove it.
Attaching the suction tube to the main body
Fig. 3
- To attach the suction tube to the main body, align both until they match and insert the
tube into the main body until it clicks into place.
- To detach it, press the release button and pull the suction tube while firmly holding the
main body.
Attaching the accessories
Fig. 4
To complete the installation of the upright vacuum cleaner, once the suction tube is
connected to the main body, hold the tube upright and attach the desired accessory.
Installing the wall bracket
Fig. 5-6
- Attach the adapter to the wall bracket as shown in Figure 5.
- Place the wall bracket against the wall and mark the drilling points for later fixing of the
bracket. It is important that the vacuum head rests on the floor to make sure the wall
bracket doesn't support the full weight of the vacuum cleaner.
- Drill the holes and fix the wall bracket with the expansion screws, then place the vacuum
cleaner and the attached accessory on the wall bracket as shown in Figure 6.
48