cecotec CONGA ROCKSTAR 6500 CENTURY ERGOWET Manual De Instrucciones página 50

ENGLISH
Dust tank assembly. Fig. 6
- To make the dust tank assembly and disassembly easier, we recommend you separate
first the main body from the vacuuming tube.
- Hold the dust tank firmly and pull the dust tank release trigger. Then, you will be able to
pull the dust tank outwards to separate both parts.
4. OPERATION
You can use this vacuum cleaner in two different manners:
- Handheld vacuum cleaner, attaching the accessories directly to the main body.
- Upright vacuum cleaner, using the suction tube with the accessories assembled.
Handheld vacuum cleaner
- Press the on/off and power switch to turn it on.
- If you want the power to be fixed, press the fixer.
- It will automatically operate in Auto mode. The power level can be adjusted at any
moment by pressing the mode selection button.
- Press the mode selection button to change the modes AUTO, MAX and ECO.
Upright vacuum cleaner
- Assemble the vacuuming tube and accessories you want to use as indicated in the
assembly section.
- Press the on/off and power switch to turn it on.
- If you want the power to be fixed, press the fixer.
- It will automatically operate in Auto mode. The power level can be adjusted at any
moment by pressing the mode selection button.
- Press the mode selection button to change the modes AUTO, MAX and ECO.
Accessories
This device includes different accessories that allow cleaning different types of surfaces,
objects, and dirt. Some of them are suitable for the upright vacuum cleaner, and others are
preferably used with the handheld one.
Jalisco brush
- To be used with the upright vacuum cleaner. Jalisco brush is especially designed to clean
hard floors but can be used efficiently to clean any type of surface, such as soft floors.
- The brush counts on a protection system that avoids tangles and prevents the
device from being damaged. The brush stops rotating and the device stops operating
automatically when it vacuums big objects or excessive dirt.
50