Sammic ST-22 Instrucciones página 5

FIGURES DESCRIPTION - PAGE 2
1 on-off lighting main switch (power)
2 belt speed control
3 crumb collector
5 bread collector pan
6 toast-bun switcht
9 loading grid
PRELIMINARY RECOMMENDATIONS
BEFORE placing and switching the oven on:
Arrange the place considering the dimensions of the toaster and checking
the maximum load of the bearing surface, which has to be horizontal,
stable and able to hold up the oven's weight and resist its temperature.
Prepare the place in order to have room enough for a correct ventilation:
take care to keep a minimum distance of 10 cm. from the side and 20 cm.
behind surrounding elements. Leave the top part free (not by the ceiling).
The appliance must not be recessed or placed in a close compartment.
When placing the appliance consider it has been tested to operate at a
room temperature of 20 +/- 5°C
During use, be careful not to close the aeration openings of the appliance.
The power cord must not hinder accessibility to the plug, which must
always be readily accessible for quick disconnection.
The data plate of the appliance must always be visible.
In case you dispose the appliance near walls and partition walls, kitchen
furniture, decorative elements, etc., these should be made of fire resistant
material in compliance with fire prevention standards.
Risk of burn and of fire. Do not touch the hot surfaces of the appliance.
The temperature of hot surfaces might be very high while the appliance is
working. Always, use protection devices for your hands.
The bread collector pan (5) and the crumb collector (3) must be placed as
shown as in the picture in page 1.
In case of damage, power cord should be removed and replaced by an
original one from trained personnel only.
Use original parts and accessories only. Do not leave working appliance
unattended. Do not use the appliance outdoors and do not expose to
damp. Mind possible slippery floor adjacent to the appliance. Do not soak
in water or any other liquid or sprinkle it. Avoid cleaning the appliance with
liquids, as it is not waterproof. Do not cover the appliance: otherwise, risk
of fire. Disconnect the plug when the appliance is switched off. Disconnect
the plug before moving the appliance. Do not tear the power cord or the
appliance to disconnect the plug from the power socket. Single and
multiple adapters and/or extensions are not recommended. Avoid any
contact between the power cord and the appliance. Do not place anything
on top of the toaster.
Let the appliance cool off for about 45 minutes before moving it.
On airborne noise emissions, the A-weighted sound pressure level is below
70 dB(A).
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
Do not handle appliance, power cord and plug with wet hands; using the
appliance wear suitable shoes and outfit (for ex. no scarfs, ties or foulard
which could easily get stuck into the moving parts of the appliance) .
Unpack the appliance carefully and keep the original packing in case you
return the product to the retailer.
Remove plastic, cardboard and various protective materials and other
accessories.
Remove the adhesive plastic film protecting the stainless steel parts
before switching the appliance on. Children should be kept away from
packing material.
If the appliance seems damaged, contact the retailer before switching it on.
If the appliance is not operating properly, turn OFF the power and let the
toaster cool. Once it is cool, unplug the toaster from the power supply and
ask for the intervention of a technician.
PROPOSED SAFETY CONDITIONS
To reduce the possibility of accidents (short circuits, injuries or fires,
etc.), and ensure the best functioning and the proper maintenance of the
machine, it is necessary to carefully read and follow these instructions.
Keep these instructions and ensure that all users of the machine read
them before use. Also keep the warranty and the declaration of conformity.
- Before using the machine for the first time, and always with the machine
unplugged, clean the food contact area.
- Never introduce your hand or any type of utensil in this area while the
appliance is in use, to avoid personal or material damages.
- Always unplug the machine after use and also to clean, inspect, move or
repair the appliance.
- Comfort or familiarity with the product (based on its repeated use) should
not replace strict compliance with the safety regulations. Be alert, pay
attention to what you are doing and use common sense when operating
the appliance.
- Do not use the appliance while you are tired or under the influence of
drugs, alcohol or medication. If you use the machine incorrectly or in an
unsafe manner, you may suffer personal or material damages.
- The models mentioned in the manual have been designed for use in
hotels, restaurants, hospitals, bakeries and for catering and commercial
use, but never for continuous industrial manufacturing.
- The manufacturer shall not be held responsible in cases in which the
machine has been used incorrectly or for any use other than those
mentioned above. Such as sanitary use, chemical use, use in explosive
atmospheres, etc.
SAFETY STANDARDS
Check that the supply voltage of the grid corresponds to the one marked
on the rating plate under or on the side of the appliance, which must be
earthed and whose circuit must be in compliance with the applicable
safety standards. In case the power socket and the plug of the appliance
do not correspond, let the socket be removed and changed by an
authorized person only.
1 It is recommended that sockets will be protected by a 0,03A (30mA)
residual current circuit breaker protective devices (RCDs)
2 The connection of an equipotential bonding to th M5 clamps is
recommended. The clamps are placed by the input of the power cord.
The terminal, if there is one, is identified by the symbol
END USE : This conveyor toaster is ideal to toast bread slices, bun and
bagel by radiant heat in breakfast halls, restaurants, bed and breakfast,
little kitchens. Toasting of coated products such as a garlic bread and
cheese sandwiches is not recommended. Any other use of the appliance
except for the ones described in this users' manual is improper and
dangerous. For commercial use only
Dimension of bread to be put in the heating chamber: 14x14 cm (max), 4x4
cm (min) thickness of cm 5,5
- 5 -
Users Manual
EN