Publicidad
Idiomas disponibles
Idiomas disponibles
EN
charger.
f
Cleaning and user maintenance of the bat-tery charger shall not be made
by children without supervision.
Keep the battery charger away from rain or moisture. Penetra-tion
of water in the battery charger increases the risk of an electric shock.
f
Keep the battery charger clean. Contamination can lead to danger of an
f
electric shock.
Before each use, check the battery charger, cable and plug. If damage
f
is detected, do not use the battery charger. Never open the battery
charger yourself. Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery chargers, cables and
plugs increase the risk of an electric shock.
3. CHARGING THE BATTERY
Check that the outer part of the stapler is clean and dry before
connecting the charger.
Safety relating to the battery and charger.
Never attempt to open the battery or the charger under any circumstance.
Never expose the battery or charger to humidity or heat (above 40°). Charge at a
temperature between 10° and 40° exclusively using the charger supplied with the
staple gun. Keep the battery away from any metal object by using the protective
plastic end piece to prevent any electrical arcing across the contacts. The charger
has double insulation, no earth cable is therefore required. Check the mains
voltage is compatible with the voltage of the appliance. Change the charger if
the cable is damaged. The appliance should be disconnected from the power
supply when the battery is removed.
Tips to Maintain Maximum Battery Life
1.
Please charge the battery pack on time before it is fully depleted.
2.
Do not recharge a fully-charged battery pack.
3.
Please charge the battery pack at room temperature from 10°C to 40°C. A
hot battery pack should be allowed to cool down before recharging.
Charging the battery
The indicator light is green when the charger is on but is not charging.
Insert the battery pack to be charged into the charger.
Insert the battery pack in the same direction of the terminals as the charger. Align
the battery pack side with the opening and slide it in place; make sure it is fully
inserted. Ensure that the battery terminals are properly connected.
When the battery pack is inserted and is being charged, the indicator light is red.
When the indicator light is green, it indicates that charging is complete. The
battery pack can be removed.
Disconnect the power supply to the charger after the charging is completed.
Charge the power tool only with the supplied charger.
60
Publicidad
