Publicidad
Idiomas disponibles
Idiomas disponibles
Parts identification
Front
WATER THROUGH
Back
WATER THROUGH
A Main body
1 Protective cap
2 System outer foil
Water inlets
4 Cleaning shutter
Foil frame release
buttons
Thumb rest
Power switch
To turn the shaver on
and off and also lock
and unlock the
power switch.
Switch lock lamp ( )
10
Charge status lamp
( )
Appliance socket
Foil frame
System outer foil
release buttons
Outer foil section
Inner blades
Trimmer
Trimmer handle
B AC adaptor (RE7-87)
Adaptor
Power plug
Cord
Appliance plug
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
into the shaver�
2
Plug in the adaptor into a
household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
• If the shape of the plug does
not fit the power outlet, use
an attachment plug adaptor
of the proper configuration.
3
Disconnect the adaptor after charging is
completed and the charge status lamp ( )
turns off.
Note
You cannot operate the shaver while charging.
Accessories
C Cleaning brush
D Oil
2
1
Publicidad
