Publicidad
Idiomas disponibles
Idiomas disponibles
Before
Each
Start-Up:
1.
Place On/Auto/Off
lever to
"OFF" and close air regulator.
2.
Pull regulator knob out, turn
counterclockwise
until it stops.
Push knob in to lock in place.
3.
Attach hose and accessories.
NOTE: The hose or accessory
will require a quick connect plug
if the air outlet is equipped with a
quick connect socket.
_Risk
of Bursting.
Too much air
pressure
causes a hazardous
risk of bursting.
Check the
manufacturer's
maximum
pressure
rating for air tools and accessories.
The regulator
outlet
pressure
must never exceed the maximum
pressure
rating.
How to Start:
1.
Turn the On/Auto/Off
lever to
"ON/AUTO"
and allow tank
pressure to build.
Motor will
stop when tank pressure reaches
"cut-out"
pressure.
2.
Pull the regulator knob out
and turn clockwise to increase
pressure. When the desired
pressure is reached push knob in
to lock in place.
The compressor
is ready for use.
N000317
14-ENG
Publicidad
