Blumfeldt Tallheo Manual De Instrucciones página 23

• After connecting the radiator, vent any air bubbles with the vent plug.
Note: Fill your system with inhibitor fluid after installation.
AFTER INSTALLATION
• Use a screwdriver to open the air vent. Open the valve and let the water
flow into the radiator.
• Check all connections for leaks.
• When the water comes out of the air vent, there is no more air in the pipe.
• Close the air vent with a screwdriver and turn the valve open. The radiator
is now ready for operation.
CLEANING AND CARE
• Wipe the surface clean with a soft damp cloth.
• Never use abrasive cleaners on this product as they will damage the
surface.
• Radiators are made of steel and should therefore not be cleaned with
corrosive or abrasive cleaning agents.
Step 6
EN
23