Home Decorators Collection DYLAN 60 Instrucciones De Montaje página 15

5
5.1. Drill a pilot hole for the sliding door guide (A) using a ø1/8 in drill bit.
5.2. Install the sliding door guide (A) with the screw (CC) and the cap (HH).
5.3. Place the 2 support bar anchors (D & P) back on their wall mark, then mark their center on the wall.
5.4-5.5. Drill a hole on the center marks with a ø5/16 in drill bit . If there are no studs located behind the support bar anchors (D
& P), then insert the wall anchors (AA) using a rubber mallet until the wall anchors are flush with the wall. Fix the center fitting of
the support bar anchors (D & P) on the wall using the screws (GG).
5.1
ø1/8 in
5.4
ø5/16 in
D
B
RIGHT DOOR OPENING
FIXED PANEL AND SUPPORT BAR INSTALLATION
Add a drop of silicone in the
holes
If there are no studs aligned to support bar
anchors behind the drywall, use the wall
anchors to ensure the screws won't become
P
A
5.2
HH
CC
A
HELPFUL HINT!
before inserting the
screws.
WARNING!
loose.
D
GG
P
P
A
LEFT DOOR OPENING
5.3
P
5.5
D
GG
D
B
PAGE 15