Volume Adjustment - Daewoo DRP-137 Manual De Instrucciones

POWER
The supplied power adapter works with voltage 100-240V - 60150Hz.
lnsert the plug into the socket for DC power (15) and the plug into a power outlet.
Note: Use on/y the supplied power adapter, other devices may have polarities and/or di erent
voltages.
Unless otherwise speci ed, the command descriptions are for the remote control.
ON/OFF
1. Set the main switch (16) to "I" to turn on the device.
2. Set the main switch (16) to "O" to turn o the device completely.
STAND-BY FUNCTION
Once the main switch to "1" position, the unit will go into standby mode (display lit with
indication time).
1. Press the button
2. Press again the button
Notes:
- To tum on/o the unit using the knob on the unit (ON/OFF knob, VOL, BASS/TREBLE (12))
press it tor about two seconds.
- The stand-by function is activated only if the main switch (16) is in "I" position.

VOLUME ADJUSTMENT

Turn the volume knob VDL(12) on the unit to increase or decrease the overall volume of
playback or press the VOL+(30) or VDL-(27) on the remote control lo increase or decrease the
volume.
MUTE FUNCTION
You can also press the MUTE(36) button on the remole control lo turn o the sound
temporarily (the volume level will ash on display); press the MUTE button again to cancel the
mute function and restare the sound.
SOURCE BUTTON
Press the FUNC (37) button repeatedly to switch among BLUETOOTH/RADID FM/USB/AUX-IN
modes.
BLUETOOTH OPERATION
Prior lo use Bluetooth function, your system should be paired rstly with your Bluetooth
device ("Pairing" means establish connection between Bluetooth device such as mobile
phone, Tablet, PC, etc...)
1. First press FUNC (37) button until you see the display "BT"; the unit will go into research for
connection with other devices BT (marked "BT" on the display will ash).
2. Enable the Bluetooth® connection on the external device (phone, tablet, etc...) with
(17) lo turn the unit.
(17) to restore standby mode.
EN
12