Husqvarna EPOS RS5 Manual De Usuario página 10

5.1 LED indicator lamp on the reference station
Light
Green flashing light
Green constant light
Red flashing light
White flashing light
Yellow flashing light
6.1 Storage
If you store the reference station indoors, keep the arm
installed at the post or wall to be able to install the
reference station on its original position again.
If you keep the reference station outdoors during the
winter, we recommend you to keep the power supply
connected.
7.1 Technical data
Dimensions
Length, max length including plate for post installation cm / in.
Width, cm / in.
Height, cm / in.
Weight, reference station kg / lb
Weight, arm kg / lb
10 - Troubleshooting
5 Troubleshooting
Status
Startup of the reference station. Wait some minutes.
In operation.
The reference station does not operate because of an error. Disconnect the power
cord and connect it again to restart the product. If the problem stays, speak to your
approved servicing dealer.
Firmware update is necessary. Speak to your local Husqvarna representative.
Only for reference station in repeater mode: The reference station in repeater mode
has no connection to the main reference station. The reference station is in startup
mode or has no connection to the main reference station. If there is no connection,
examine the main reference station or the nearest repeater.
6 Storage and disposal
7 Technical data
6.2 Disposal
Obey the local recycling requirements and applicable
regulations.
36 / 13.8
19 / 7.5
36 / 13.8
0.88 / 1.9
0.33 / 0.73
1512 - 006 - 30.10.2023