Maxeon SunPower Reserve Guía Rápida De Instalación página 2

SunPower Reserve
Home energy storage system
NEED MORE HELP?
If you would like to contact us directly, please visit our offcial website:
https://sunpower.maxeon.com
for more information.
1.0 Transport
Risk of injury when lifting the battery as the battery weighs 90 kg. There is risk of injury if the battery is lifted
incorrectly while being transported.
Transport the battery always as described below.
CAUTION
Handle with care, choose the corresponding handling method according to the weight, and pay attention to safety.
During transportation, please follow these guidelines:
1. The original packaging should be used for transportation.
2. Handle with care, choose the corresponding handling method according to the weight, and pay attention to safety.
3. During transportation, please keep the packaging away from dangerous sources and take waterproofing measures.
4. Secure the packaging during transportation.
2.2 Dimensions
610mm
≥300mm ≥300mm
For additional batteries, keep a minimum spacing of 300mm. Do not stack batteries.
CAUTION
≥300mm ≥300mm ≥300mm
6
Quick Installation Guide
(RESERVE-BAT-1-DC-10.1-INT)
548267 Revision B - Jun 2023
212mm
250mm
≥300mm
≥300mm ≥300mm
2 1
2.0 Product Overview
(1)
(2)
(6)
(*)
Position Description
1 Battery Start Button
2 Battery Circuit Breaker
3 Battery LED Display
4 Battery+ Power Connector
5 Battery- Power Connector
6 Grounding terminal
7 BMS COM (1)
8 BMS COM (2) (with terminal resistor)
2.1 LED Display
The three LED indicators on the front cover provide information about the State of Change (SOC) operational status of the battery.
State of Charge (SoC) Description
SOC≤10%
10%<SOC≤30%
30%<SOC≤50%
50%<SOC≤60%
60%<SOC≤90%
90%<SOC≤100%
2.3 Scope of Delivery
BATTERY (RESERVE-BAT-1-DC-10.1-INT)
Battery Pack (x1) Left Side Plate (x1) Right Side Plate (x1)
Limit Bracket (x2) Plastic set screws (M5-L8)
(x12)
Battery Quick Installation Grounding Cable (x1) Expansion Battery Positive
Guide (x1)
2.4 Mounting Location
IP65 90kg
2.5 Installation
1.
≥70mm ≥15mm
(3)
(4)
(5)
(6)
(8)
(7)
Symbol Description
White LEDs flash
White LED on
LEDs are off
Wall bracket (x1)
Plastic Blockage (x4) Wall Anchor and Expansion Y type Terminal Blocks (x2)
Screws (x4)
Expansion Battery Negative
Power Cable (x1) Power Cable (x1)
0°
50°C
90°
-10°C
2.
0°
2
3
≥70mm
M6
6 6
SW10
M5x12 (x3)
1
Remove 4
5
6