Descargar Imprimir esta página

GRE VCB15 Manual De Instrucciones página 5

Limpiafondos eléctrico
Ocultar thumbs Ver también para VCB15:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
Avoid picking up sharp objects with this product. They may damage the cleaner
and filler.
Use extra care when cleaning stairs in the pool.
Charge the cleaner indoor in a clean, dry place with good ventilation.
lf the cleaner is not to be used far an extended period, detach it from the
charger, use dry damp cloth to clean and dry the cleaner and accessories.
Store them in a well ventilated area away from the sunlight, children, heat,
ignition sources and pool chemicals. Never leave the cleaner plugged far long
term storage. Recharge the cleaner every three months.
lf you do not use the transparent body part, you should take it off the electric
cleaner.
Above warnings and cautions are not intended to incorporate all possible
instances for risks and / or severe injury. Pool / spa owners should always
exercise intensive caution and common sense when operating the cleaner.
GETTING STARTED
Set Up for Battery Charging
Note: When the battery power completely exhausted, it is normal that the
charging indicator will be flashing for 20-50 seconds.Then the indicator will
turn into red and the battery will be charging correctly.
(3) After charging 3 hours, the charger becomes green, and VCB15 is fully
charged.
(4) Now, it is time to work.
WARNING!
Charging must be done in indoors, in a well ventilated area away from the
sunlight, children, heat and ignition sources. Never use the charger if any
damage is faund. Use the original the charger provided only. Make sure cleaner
and the charger are clean and dry befare set up. NOTE: Charge the cleaner 3
hours prior to the first use. Normally cleaner can be operated far 35 minutes
after fully charged.
Set Up for Operation
The arrow of transparent suction head part and transparent body should be
aligned, and then you can put down the transparent garbage can to the bottom
(1) Plug one end of the charger into
the socket, and the charger is green.
(2) Then, plug one end of charger to
VCB15, the charger is red, the charger
is working now.
3

Publicidad

loading