BGS technic 2834 Manual De Instrucciones página 5

SELECTION GUIDE
Select the appropriate type of torque wrench and socket according to the torque value required for the
bolt or nut being tightened.
SET A TORQUE VALUE
4 Locker
5 Center line
6 Main scale
7 Graduation line
8 Supplementary scale
Pull back the locker to unlock the supplementary scale.
Turn the supplementary scale to set a torque.
The set torque value is a combination of values on the main scale
and supplementary scale.
ADJUSTMENT (Example 66 Nm)
STEP 1: Set at 60 Nm
Turn supplementary scale until 60 Nm on main scale close to
graduation line and the 0 on the supplementary scale is aligned
with centerline.
Now the torque is set at 60 Nm.
STEP 2: Set at 66 Nm
Turn clockwise until 6 on supplementary scale is aligned with
centerline.
Now the torque is set at 66 Nm.
Apply the socket on to a bolt head or nut.
Turn the torque wrench clockwise to fasten the bolt.
Stop pulling the wrench when you hear a "Click", this means it's
already at the torque value which you set.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Torque Wrench
Standard Socket
Tightened Nut
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed