TORY BURCH Ronda 705 Manual Del Usuario página 4

CHRONOGRAPH
Ronda 5030.D
Hour hand
SETTING THE TIME AND DATE
1. Pull crown out to position 2.
2. Turn crown clockwise to set date for previous day.
3. Pull crown out to position 3.
4. Turn crown clockwise until date changes to present day.
5. Continue to turn crown to set correct am/pm time.
6. Return crown to position 1.
Do not change the date between 10pm and 2am. This is when the
movement is in position to carry out the automatic date change; any
interference may cause damage to the movement.
Minute hand
A
Second hand
Crown
1 2 3
B
Date
6
CHRONOGRAPH FUNCTIONS
• The chronograph counter at 6 o'clock measures hours.
• The chronograph minute counter at 10 o'clock measures 30
minute increments.
• The center stop-second measures 60 seconds per rotation.
Center stop-second
Minute counter
Hour counter
Please Note:
Before using chronograph, please ensure that:
• Crown is in position 1.
• The three chronograph hands are precisely at zero (12:00) position
after pressing B. Should this not be the case, the positions of
the hands must be adjusted. Please refer to the section titled
"Adjusting the Chronograph Hands to Zero Position."
Pusher A
Start / Stop
A
Crown
1 2 3
B
Pusher B
Interval / Reset
7