TORY BURCH Ronda 705 Manual Del Usuario página 6

Do not change the date between 10pm and 2am. This is when the
movement is in position to carry out the automatic date change; any
interference may cause damage to the movement.
CHRONOGRAPH FUNCTIONS
• The chronograph counter at 12 o'clock measures the tenths of
a second.
• The chronograph minute counter at 9 o'clock measures 30
minute increments.
• The center stop-second measures 60 seconds per rotation.
Chronograph 1/10
second hand
Chronograph
minute counter
Center
stop-second
Please Note:
Before using chronograph, please ensure that:
• Crown is in position 1.
Pusher A
Start / Stop
A
Crown
1 2 3
B
Pusher B
Interval / Reset
10
• The three chronograph hands are precisely at zero (12:00) position
after pressing B. Should this not be the case, the positions of the
hands must be adjusted. Please refer to the section titled "Adjusting
the Chronograph Hands to Zero Position."
Basic Function (Start / Stop / Reset)
1. Press A to start/stop chronograph.
2. Press B to reset to zero.
Intermediate or Interval Timing
1. Press A to start chronograph.
2. Press B while the chronograph is running to measure intervals (timing
continues in the background).
3. Press B again to display ongoing measured time.
4. Repeat steps 1 and 2 to measure additional intervals.
5. Press A to finalize timing.
6. Press B to reset to zero.
Adjusting the Chronograph Hands to Zero Position
1. Pull crown out to position 3.
(All chronograph hands are in their correct or incorrect zero position.)
2. Keep push-buttons A and B depressed simultaneously for at least
2 seconds.
11