Uniteck UNIFIX 1.C 30 Manual Del Usuario página 9

Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
The Unifix 1C 30 mounting bracket has been designed to be used on a flat surface (ex.: campervan
roof, houseboat).
SAFETY INSTRUCTIONS
•
Take the appropriate mesures to prevent accidents during your mounting steps.
•
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
Obtain and Read carefully the safety instructions for the SIKA glue and its preparer on website
www.quickfds.com.
•
When finished and after 72h, check and ensure that all of your brackets and panels are fixed
properly. We recommend to operate an adhesion test 72 hours after sealing.
UNIFIX - COMPOSITION
I
Provided elements
x4
X4
Blocking
wedge
For the preparation of the surface before gluing the brackets: only use a wet cloth and the
degreaser provided. Do not use alcohol/white spirit...
Respect 48 to 72 hours of drying time. Do not move or manipulate during this time.
Sika flex must be applied at a temperature between 5°C and 35°C, the optimum application
temperature being between 15°C and 25°C.
When finished and after 72h, check and ensure that all of your brackets and panels are
fixed properly.
When finished and after 72h, check and ensure that all of your brackets and panels are
fixed properly
x4
x1 X1
Glue Degreaser
Preparer
www.uniteck.fr
D5 D5
x12 x12
For the mounting, make sure
you have a slightly wet cloth
for dusting and a dry cloth for
degreaser-preparer application
M5 X4
x12 Low wedge
EN
9