Melchioni Family MF 2475IND Manual De Instrucciones página 11

5. USE
The rear selector switch behind the grille activates blade rotation and therefore ventilation, the speed of which
depends on the start button pressed:
- Black button: maximum speed
- Dark grey button: medium speed
- Light grey button: minimum speed
- White button: stop rotation
6. CARE AND MAINTENANCE
The product does not require any maintenance. Use a damp cloth for cleaning. Do not use any aggressive or
abrasive cleaning agents. It is imperative to disconnect the blade from the mains before cleaning. Do not use
compressed air to clean the blade, and in any case never try to help the blade rotate other than normal use of the
appliance. A long, soft bristle brush can be used to remove any dust deposits. Wait until it is completely dry before
reconnecting the appliance to the mains.
7. TROUBLESHOOTING
In the event that the appliance exhibits abnormal operating conditions other than that stated in Chapter 2 above,
it is advisable to consult the following table for simple troubleshooting.
Problem
The fan does not start.
The fan is difficult to move.
If the product shows malfunctions or anomalies other than those indicated, it is highly probable that the problem
cannot be solved independently. In this case, consult qualified technical personnel.
8. TECHNICAL DATA
Power supply voltage:
Motor power :
Dimensions :
Weight :
Cable length:
9. CONFORMITY OF THE PRODUCT
The producer Melchioni Spa declares that the product Industrial fan Mod. MF 2475IND (cod. [118620064) is in
compliance with Directive 2014/30/EU of the European Parliament and of the Council, of 26 february 2014, on the
harmonisation of the laws of the Member States relating to electromagnetic compatibility.
The producer Melchioni Spa declares that the product Industrial fan Mod. MF 2475IND (cod. [118620064) is in
compliance with Directive 2014/35/EU of the European Parliament and of the Council, of 26 february 2014, on the
harmonisation of the laws of the Member States relating to the making available on the market of electrical
equipment designed for use within certain voltage limits.
Possible cause
The electrical plug is disconnected
from the mains.
The electrical socket to which the
fan is connected does not supply
electricity.
Parts are not fully assembled.
230 VAC 50 Hz (+ - 10%)
124 W
82.6x85.6x31.8cm
14.4Kg
146 cm
10
Probable solution
Plug the electrical plug into a
normal 10 A household socket.
Check the efficiency of the socket
by connecting another appliance
that is definitely working. If
necessary, contact an electrician.
Review the assembly process in
chapter 4