Warning: do not allow the dust inside to exceed the max mark. Make sure to empty it after each
use.
Note: remove the aluminium tube following the instructions at the beginning of this manual to
remove dirt more easily.
•
Turn the product off, press the dust tank cover release button and open the cover. Empty
the dust inside.
•
If there is any dirt stuck to the tank's inner walls; hold the product's handle with one hand,
press the dust tank release button and turn the tank anticlockwise to remove it completely.
•
Take out both filters (sponge and mesh), rinse them with water and allow them to dry com-
pletely before placing them in their correct position again.
•
Apague el producto, pulse el botón de liberación de la tapa del depósito de suciedad y ábra-
la. Vacíe la suciedad de dentro.
•
En caso de que haya suciedad pegada a las paredes del interior del depósito, sujete el pro-
ducto por el mango con una mano, pulse el botón de liberación del depósito de suciedad y
gírelo en sentido antihorario para retirarlo completamente.
•
Saque los dos filtros (de esponja y de malla), enjuáguelos con agua y deje que se sequen por
completo antes de colocarlos en su posición correcta de nuevo.
•
Once the cleaning is completed, close the dust tank cover, introduce it again in the main
body, turn it clockwise and make sure you hear a "click" sound indicating it is properly fixed
Warning: make sure all the components are completely dry before placing them again into their
correct position.
Suction base
Note: it is suggested to clean the suction base after every 4-5 uses.
Turn the product off.
•
Remove the suction base by pressing the suction base release button and pulling from it.
•
Clear any hair, dust or object stuck to it.
•
Introduce the suction base into the aluminium suction tube again
•
To take the brush out, remove the cover and take it out through the upper part
05124_ThunderBrush 670 Inmortal Battery 22,2 V_Manual_MV.indd 23
CONGA THUNDERBRUSH 670 IMMORTAL BATTERY 22,2 V
ENGLISH
23
13/12/18 17:46