MikroTik RBD23UGS-5HPacD2HnD-NM Guía Rápida

EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.6 or the latest version to ensure compliance with local authority regulations!
It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed.
This "NetMetal ac²" series Quick Guide covers models: RBD23UGS-5HPacD2HnD-NM (NetMetal ac²).
This is s wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on
Technical specifications, brochures, and more info about products at
The most relevant technical specifications for this product can be found on the last page of this Quick Guide.
Configuration manual for software in your language with additional information can be found
MikroTik devices are for professional use. If you do not have qualifications please seek a
Depending on the antenna used, you must set its gain and set the installation setting to '
Quickset, CPE
authorities. This is done in the
First steps:
Open the upper cover and connect an external antenna.
Open the bottom cover and connect the device to the power source.
Open network connections on your PC, search for MikroTik wireless network, and connect to it.
The configuration can be done through the wireless network using a WinBox configuration
Download and open "Winbox",
Click on the MAC address, user name: admin and there is no password, click Connect
sticker).
Download the latest "ARM" packages to your PC
Upload downloaded packages to the Winbox "Files" menu and reboot the device.
In the "QuickSet, WISP AP" menu set up the following: Choose your country, to apply country regulation settings.
Set the antenna gain, depending on the antenna used.
Set up your wireless network password in the left field.
Set up your router password in the bottom field.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures!
Exposure to Radio Frequency Radiation:
uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general
public.
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
BG - Български. Бързо ръководство:
Това устройство трябва да бъде надстроено до RouterOS v7.6 или най-новата версия, за да се гарантира спазването на местните регулаторни
разпоредби.
Крайните потребители са отговорни за спазването на местните разпоредби, включително работата в рамките на законни честотни канали,
извеждане на продукция изисквания за захранване, окабеляване и изисквания за динамичен избор на честота (DFS). Всички радиоустройства
на MikroTik трябва да бъдат професионално инсталиран.
Тази серия "NetMetal ac²" Бързо ръководство обхваща модели:
Това е устройство за безжична мрежа. Можете да намерите името на модела на продукта на етикета на регистъра (ID).
Моля, посетете страницата с ръководството за потребителя на
Или сканирайте QR кода с мобилния си телефон.
Технически спецификации, брошури и повече информация за продуктите
Най-важните технически спецификации за този продукт могат да бъдат намерени на последната страница на това Кратко ръководство.
Ръководство за конфигуриране на софтуер на вашия език с допълнителна информация можете да намерите на
Устройствата MikroTik са за професионална употреба. Ако нямате квалификация, моля, потърсете
В зависимост от използваната антена, трябва да настроите нейното усилване и да зададете настройката за инсталиране на '
гарантира, че EIRP отговаря на ограничението, определено от местните власти. Това се прави в менюто
https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone.
menu.
choose "Neighbors" to find the device.
https://mikrotik.com/download
This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
https://mikrotik.com/products
at https://mt.lv/help
consultant https://mikrotik.com/consultants
Outdoor
tool https://mt.lv/winbox.
(or, for some models, check user and wireless passwords on the
.
RBD23UGS-5HPacD2HnD-NM (NetMetal ac²).
https://mt.lv/um-bg за пълното актуализирано ръководство за употреба.
на https://mikrotik.com/products
'. This is to ensure that EIRP meets the limit set by the local
https://mt.lv/help-bg
консултант https://mikrotik.com/consultants
Quickset, CPE .
Outdoor '. Това е, за да се