Publicidad
Idiomas disponibles
Idiomas disponibles
Battipav srl
CAUTION
•
Danger of presence of electric current.
The machine has an internal electric system:
CONNECT THE MACHINE TO A SYSTEM WITH
DIFFERENTIAL PROTECTION AND EFFECTIVE
EARTH WIRE.
CAUTION
•
Danger of prolonged exposure to noise:
The continuative use of the machine causes an
exposure to noise levels above 85 dB (A).
OPERATORS
MUST
DEFENDERS.
CAUTION
•
Danger
of
exposure
materials.
OPERATORS
PROTECTIVE GOGGLES.
CAUTION
•
Danger of accidental contact with the moving
tool.
OPERATORS MUST WEAR HEAVY PROTECTIVE
GLOVES
ALWAYS STAY IN THE WORKING POSITION
(Pos. 1 picture 19) DURING THE MACHINE
OPERATION PHASES:
•
During material loading;
•
During material cutting;
•
During the cutting tool deceleration following the
machine stop.
MAINTENANCE
CAUTION
BEFORE PERFORMING ANY OPERATION OR
ADJUSTMENT, DISCONNECT THE MACHINE FROM
THE SUPPLY MAINS.
USE
PROPER
EAR
to
fragments
MUST
WEAR
CLEANING
CAUTION
DO NOT WASH THE MACHINE WITH HIGH
PRESSURE WATER JETS
28
It is extremely easy to clean the EXTRA saw by
loosening the locking nuts and removing the
working table. Through the side tap remove any
working residual.
CAUTION
AFTER THE TANK CLEANING OPERATIONS,
29
PLACE THE WORKING TABLE BACK IN
POSITION, OBSERVING THE DISTANCE FROM
THE LEG SUPPORT.
For a greater efficiency of the patented
30 31
of
SPRAY SYSTEM lubrication system, clean
it regularly as indicated.
CAUTION
MOTOR CARRIAGE ADJUSTMENT
The motor carriage is provided with a register for the
vertical play adjustment.
For correct adjustment, proceed as follows:
• with a 3 mm Allen wrench, screw both front
32
adjustment dowels (A), until the play is
eliminated.
• repeat the operation for both back adjustment
33
dowels (B).
CAUTION
TIGHTEN THE FOUR REGISTERS EQUALLY IN
ORDER TO OBTAIN SUITABLE SMOOTHNESS.
GB
29
Publicidad
