Descargar Imprimir esta página

Bosch GLL50-20 Instrucciones De Funcionamiento Y Seguridad página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

DO NOT mix old and new batteries. Replace all
of them at the same time with new batteries of
the same brand and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Remove batteries if the device will not be used
for several months.
Risk of fire and burns. Do
not open, crush or heat
above 158°F (70°C) or incinerate.
Personal safety
If laser radiation strikes your eye, you must
deliberately close your eyes and immediately
turn your head away from the beam.
Do not make any modifications to the laser
equipment.
Stay alert, watch what you are doing and use
common sense when operating a tool. Do not
use a tool while you are tired or under the in-
fluence of drugs, alcohol or medication. A mo-
ment of inattention while operating a tool may
result in serious personal injury or incorrect
measurement results.
Use safety equipment. Always wear eye pro-
tection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will re-
duce personal injuries.
Use caution when using laser tools in the vicin-
ity of electrical hazards.
Magnets
Keep the magnetic accessories away
from implants or other medical de-
vices such as pacemaker or insulin
pumps. The magnets generate a field
that can impair the function of implants or med-
ical devices, which may lead to serious personal
injury.
160992A8JG GLL50-20 G 202306.indd 7
General Safety Rules
Keep the tool, positioning device, and laser
target plate away from magnetic data medium
and magnetically-sensitive equipment. The ef-
fect of the magnets of the tool and laser target
plate can lead to irreversible data loss.
Use and care
Use the correct tool for your application. The
correct tool will do the job better and safer.
Do not use the tool if the switch does not turn
it on and off. Any tool that cannot be controlled
with the switch is dangerous and must be re-
paired.
Store idle tool out of the reach of children and
do not allow persons unfamiliar with the tool
or these instructions to operate the tool. Tools
are dangerous in the hands of untrained users.
Maintain tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the op-
eration. If damaged, tool repaired before use.
Many accidents are caused by poorly maintained
tools.
Use the tool, accessories, etc., in accordance
with these instructions and in the manner in-
tended for the particular type of tool, taking
into account the working conditions and the
work to be performed. Use of the tool for op-
erations different from those intended could re-
sult in a hazardous situation.
Service
Have your tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the tool is
maintained.
Develop a periodic maintenance schedule for
tool. When cleaning a tool be careful not to dis-
assemble any portion of the tool since internal
wires may be misplaced or pinched or may be
improperly mounted. Certain cleaning agents
such as gasoline, carbon tetrachloride, ammo-
nia, etc. may damage plastic parts.
SAVE THESE INSTRUCTIONS
7
6/9/23 9:46 AM

Publicidad

loading

Este manual también es adecuado para:

Gll50-20gGll50-20gl3601k652103601k65310