GadgetMonster GDM-1052 Manual Del Usuario página 9

7. Battery
8. USB to battery charging cable
9. Power switch inside the boat
Use (4.) to move the boat forward or backwards.
Use (5.) to turn the boat to the left or right.
Use
Remove the top of the boat to turn the power switch on the inside of
the boat. Put the top of the boat back.
Place the boat in water.
Turn the power switch to on, on the remote control.
Use the remote control to control the boat.
If you notice the boat's speed is slowing down. It is indicating that
the battery is low. Drive the boat to land. Charge the boat's batte-
ries.
Safety function
The boat has a safety function that checks if the boat is
in the water. When it is in the water the motor will start.
When it is not in water the motor will not start. This is
intended and normal.
Charging
Connect the charging cable to the battery and to a USB power
source. For example, a computer or USB power adapter. One LED
is red and the other LED is flashing green while charging. When the
green LED changes to steady green, it means the charging is com-
pleted.
Batteries (remote control)
Open the battery compartment, insert the batteries. Close the bat-
tery compartment.
9