BE QUIET! BQT P10-750W Manual Del Usuario página 18

1. INTRODUCTION
Thank you for deciding to fit your computer with a be quiet! DARK POWER PRO 10 Series power supply.
In order to be able to answer your initial questions in advance, we have summarized the advantages and
specifics of the DARK POWER PRO 10 power supply series in this comprehensive manual.
The latest generation of the DARK POWER PRO 10 Series offers many technical advancements and is a
logical, ongoing development of the very successful DARK POWER PRO
Should you have any further question, please contact our customer service. See contact information
in item Manufacturer's details.
PC systems are continually becoming more and more powerful and require more electricity due to the
use of high performance graphic cards and faster processors, especially on the +12V cables.
Our DARK POWER PRO 10 Series power supplies are ideal in that they have sufficient reserve
capacity, even for the operation of PCI Express graphic cards in SLI or Crossfire arrays.
Our DARK POWER PRO 10 Series power supplies have an extremely high efficiency level of up to 93%.
2. SAFETY INSTRUCTIONS
Before commissioning, please observe all the items in this guide. The power supply is only
guaranteed to function properly if the instructions are followed thus providing you with
maximum satisfaction with your DARK POWER PRO 10 product.
Caution! Only use the supplied cable set. Using cables that were not included (e.g. cables of older
power supply unit series) may lead to defects!
Never open the power supply case. The electronic components inside the case generate a high voltage
that is dangerous to humans. Even after disconnecting the power supply from the network, some parts
still have high voltages. For this reason, a power supply adapter should only be opened by authorized
personnel. Opening the device voids your warranty.
• Never handle the power supply with wet or damp hands when in operation.
• Never insert objects into the power supply's apertures/fans.
• Note that the power supply is designed for use indoors in conditions without high levels of moisture
in the ambient air. Using the power supply outdoors will lead to serious damage.
• Never work on the power supply while it is connected to the mains. (In this case, always set the
power switch to "0" and if necessary, disconnect the power plug).
• In the event of a short circuit in the device, unplug the mains cable and do not use the device.
Important: Only press the "Overclocking Key" when the power supply is switched off!
Make sure that your PC is not located directly next to a heating system or any other source of heat.
Make sure that your computer case is sufficiently ventilated by means of additional fans; with today's
complex and powerful systems an ATX-compatible power supply is incapable of dissipating the heat
produced in the PC case without additional support.
18
Series.
P9