Brandson Equipment 20191120CZ009 Manual Del Usuario página 35

• Do not use the device during rest periods or very early
in the morning or late at night. Make sure that you do
not disturb other people nearby.
• Guide the power tool to the workpiece only after
switching it on. Otherwise there is a risk of kickback if
the tool gets caught in the material.
• Make sure that the base plate always butts against the
workpiece.
• Caution! The saw blade is very hot after sawing.
• Do not allow the tool to run idle unnecessarily.
• Do not slow down the saw blade suddenly after switch-
ing off.
• Always clamp the material firmly. Do not support the
workpiece with your hand or your foot. Do not touch
any objects or the ground with the running saw.
• Some materials may contain toxic chemicals. Take pre-
cautions to prevent inhaling this dust and skin contact
with it. Follow the safety data of the material manufac-
turer.
• This device is not intended to be used by individuals
(including children) with reduced physical, sensory, or
mental capabilities or lack of experience and/or knowl-
edge unless they are supervised by a person responsi-
ble for their safety or have been instructed on how to
use the device by any such authorised person. Children
should be supervised to ensure that they do not play
with the device.
• Keep body parts and objects away from rotating parts.
35
English