Descargar Imprimir esta página

GE G188 Manual Del Propietário página 3

Ocultar thumbs Ver también para G188:

Publicidad

Idiomas disponibles

Idiomas disponibles

GEAppliances.ca
PROPERINSTALLATION
This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
#you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.ce or by calling
800.561.3344.
[]
[]
[]
[]
Ensurethot the hot water hose is connected to the "H"
(internal red screened) valve and the cold water hose is
connected to the "C" (internal blue screened)valve.
Install or store where it will not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate the
warranty.
Properly ground washer to conform with all governing
codes and ordinances. Follow details in the Installation
Instructions.
To ensure proper installation, run two small loud size
Whites cycles BEFORE washing the first loud.
[]This washer does not include water supply hoses.
GEstrongly recommends the use of factory specified
parts. A list of factory hoses available for purchase are
listed below. These hoses are manufactured and tested to
meet GEspecifications.
GEstrongly recommends the use of new water supply
hoses. Hosesdegrade over time and need to be replaced
every 5 years to reduce the risk of hose failures and water
damage.
Parts and Accessories
Cull 1.800.661.1616
during normal business hours or contact
your local authorized GE parts distributor.
Part Number
Accessory
PMI4XIO002
Or
PMI4XIO005
4 ft Rubber Water Supply Hoses
4 ft Braided Metal Water Supply Hoses
WHEN NOT IN USE
[] Turn off water faucets to minimize leakage if a break or
rupture should occur. Check the condition of the fill hoses;
GErecommends changing the hoses every 5 years.
SAVE THESE INSTRUCTIONS

Publicidad

loading