Publicidad
When
encountering the information
icon, please refer to the relevant
assembly step for additional comments and
assistance.
To
assemble
this product
(these items
not supplied)
.0101
8mnIN
el.
Some parts may have sharp edges.
Please be
careful when handling components.
Nie
Always wear gloves,
eye
protection,
and long
sleeves
when assembling or performing
any maintenance on
your product.
Do
not
attempt
to assemble the product
in
windy or wet conditions.
To
prevent injuries, do not allow children to play under the product during assembly.
Do
not climb or stand
on
the
roof.
Some versions
of
this product
are
painted.
If
color
was
scratched
during
assembly it
can be
fixed
with
the
following
tints:
White
-
RAL
9016
This
product
is
suitable for
Palram's Patio Covers
range
Please
consult your
local
authorities if any permits
are
required to construct the product.
It
is
highly recommended to
be assisted by
a
second person
in
some steps.
Sort the parts and check according to the contents parts
list.
This
product
is
suitable for
Palram's Patio Covers
range
This
product must
be
assembled on
a
solid
base (such
as
concrete or asphalt)and anchored
to the ground.
Choose
your
site
carefully before beginning
assembly. Make sure
that the mounting
surface
is
leveled and clean from sharp objects
in
order to prevent
scratches
or damages to the product.
RtPrior
to the Extention installation,
several parts
from the
Patio
cover needs to
be
dismantle,
it
is
recommend to
keep
them
in
a
safe
place
for future
need.
These
instructions mainly
refer
to the assembly of the
SideWall on
the right
side
of the patio
cover. Assembly
of
the
SideWall on
the left
side
of
the patio
cover
is
possible
taking the
same steps.
In
several
steps"Option
1"
or"Option
2"
notifications represent the
assembly
side
selection."Option
1" refers
to assembly on the left
side
while
"Option
2" refers
to the right.
While
mounting the frame structure to
back wall or
floor
the application of
silicone sealant
is
needed
in
order to ensure maximal sealing.
Step
3
:
Please
follow"Option
1"
or"Option
2"
according to the
side
you chose
to mount the
Side Wall.
Step
4
:
Please
attach
#7513/7477 with
part #7482 already attached to the wall.
Step
6
:
It
is
important
to assemble the
holes
outwards
in
order to allow the
water draining out.
Step
7
:
Please
attach part #7477 with #7513
as
illustrated
in
drawing
7a.
Step
20:
Please
follow"Option
1"
or
"Option
2"
according to the
side
you chose
to mount the
Side Wall.
Use
part #7514 when installing the
SideWall on
the left
side
of
the patio
cover.
Use
part #7485 when installing the
SideWall on
the right
side
of
the patio
cover.
Step
21
:
Please
follow"Option
1"
or
"Option
2"
according to the
side
you chose
to mount the
Side Wall.
Step
40:
Application of
silicone sealant
is
possible if
necessary.
Step 43
:
It
is
possible to
trim the
panel
to
desired
size
if needed.
Step 45
:
Please
insert the sealing rubber (#7473)
at
the
same
time; on both
sides
of the
panel
as
described
in
drawing 45b.
Step
49:
Please use
the leftovers
of
sealing
rubber (#7473) from step 45.
Publicidad
