Publicidad
Idiomas disponibles
Idiomas disponibles
CARE & MAINTENANCE
Cleaning the Condenser
If the drying process is completed, open the dryer
door and wait for it to cool down.
1. Open the plinth and release the 2 cover locks.
2. Hold the condenser by the plastic part and pull
it out.
3. Clean with a showerhead and wait for the water
to drain off.
4. Fully insert the condenser into its seat and lock
the 2 cover locks.
5. Close the plinth cover.
NOTE
Clean the condenser when you see the warning
"Condenser Cleaning".
NOTE
The condenser should be cleaned after every 30
completed drying programs or once a month even if
the warning has not activated.
Cleaning the Humidity Sensor
Inside the dryer, there are humidity sensors that
detect whether the laundry is or is not dry.
1. Open the dryer door.
2. If the dryer is still hot due to the drying process,
wait for it to cool down.
3. Using a soft cloth soaked in vinegar, wipe the
metal surfaces of the sensor and dry them.
4. Replace the lint filter and close the dryer door.
NOTE
Clean the metal surfaces of the sensor 4 times per
year.
NOTE
Do not use metal tools to clean the metal surfaces of
the sensor.
WARNING
Due to the risk of fire and explosion, do not use
solution agents, cleaning agents or similar products
when cleaning the sensors.
19
Publicidad
