Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS (continued)
3.
Apply thread seal tape (E) to the threads on the diverter (C).
Confirm a washer (3.1) is pre-inserted into the diverter (C).
Thread the diverter (C) onto the shower arm (3.2) and hand
tighten. Do not overtighten. Once the diverter (C) is attached,
tighten the set screw on the diverter (C) using the Allen
wrench (F).
4.
Confirm a washer (4.1) is pre-inserted into the fixed
showerhead (B). Thread the fixed mount showerhead (B) onto
the top threads on the diverter (C) and hand tighten. Do not
overtighten.
5.
Insert a washer (G) into the hose nut (5.1) on the shower hose
(D). Thread the hose nut (5.1) on the shower hose (D) onto the
bottom threads (5.2) of the diverter (C). Hand tighten, but do
not overtighten.
Insert a washer (G) into the hose nut (5.3) on the remaining
end of the shower hose (D). Thread the hose nut (5.3) onto the
end of the handheld showerhead (A). Hand tighten, but do not
overtighten.
6.
Place the handheld showerhead (A) into the bracket (6.1) on
the diverter (C) and adjust to the desired position. Turn on the
water and check for leaks. If a leak occurs, tighten the
connection that is leaking.
3
C
4
B
5
C
6
4
3.2
F
3.1
E
C
4.1
A
G
5.1
G
D
5.2
A
6.1
5.3
D
C
Publicidad
