Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
1. Problem: No LED l i t .
Possible Cause: AC end i s not making a good
connection.
Solution: Check for poor connection at AC side.
2. Problem: Green LED k e e p s blinking.
Possible Cause: Clamps are not making a good
connection.
Solution: Check for poor connection at battery and
f r a m e .
3. Problem: Red L E D i l l u m i n a t e d right away when
connecting onto a battery.
Possible Cause:
a. Incorrect battery voltage.
b. Battery is at full charge capacity
Solution:
a. Verify that c h a r g e r selector switch is in
correct 6V or
battery's voltage. The c h a r g e r will give you
a warning if you a r e connecting to the incorrect
application.
b . Th e b atter y i s cu r r en tl y at fu l l ch ar g e an d
w il l continue in maintenance/float mode until
voltage drop occurs. At the time of voltage, drop,
charger will resume in maintenance, charging
mode
12V position to
- 14 -
match the
Publicidad
